Legal Provisions

Product safety

Every Arrow3D product is designed and printed in Groningen. Here you will find the key safety information for each product, and how to reach us if something is not right.

Manufacturer

Arrow3D Groningen

Aquamarijnstraat 675, 9743 PS Groningen, the Netherlands

Email: [email protected]

Phone: +31 50 569 0964

Chamber of Commerce (KvK) no. 42207466

Item number and batch number

Every label shows an item number (e.g. MT-01) and a batch number. The batch number is the production month (YYMM, e.g. 2611 = November 2026). For custom work, the batch number is the invoice number. This lets us trace every product if needed.

Miniatures and decorations

Item no.: MT-01 Martini Tower · HS-01 Central Station · KA-01 3D Map · NB-01 Name sign · CC-01 ChromaCanvas · material: PLA

  • Decorative item, not a toy.
  • Contains small, fragile parts: keep away from children under 3.
  • PLA can deform above 50 °C: keep it out of direct sunlight, away from heaters and out of hot cars.
  • Clean with a dry or slightly damp cloth, without harsh cleaning products.
  • Central Station: slide the parts together gently and do not force them.
  • Name sign: stick it on a clean, flat surface so the tape holds properly.

Clock with your own design

Item no.: KL-01 · material: PLA, with clock movement, hands and battery · batch number = invoice number

  • Wall clock, not a toy.
  • Contains a battery and small parts (such as the nut and the hands): keep away from children under 3. If someone has swallowed a battery, see a doctor immediately.
  • Hang the clock on a sturdy screw suitable for your wall, and check that the screw head sits properly in the keyhole on the back.
  • PLA can deform above 50 °C: do not hang it in direct sunlight or above a heater.
  • Take an empty battery to a battery collection point. At the end of its life, dispose of the clock movement separately as electronic waste.
  • Clean with a dry or slightly damp cloth, without harsh cleaning products.

Reitdiephaven birdhouse

Item no.: RV-02 · material: PLA (house, window frames, windows) and PETG (roofs, tower frame, perch, entrance rings, wall bracket)

  • Birdhouse with insect hotel, not a toy.
  • Mount it securely with the included wall bracket and screws, not above a walkway.
  • Small parts (perch, entrance rings): keep away from children under 3.
  • Preferably hang it out of strong afternoon sun: the PLA house can deform above 50 °C.
  • Clean it after the breeding season, wearing gloves.
  • Unpacking: never lift the house by the tower while the packing material is still around it.

NFC tags, NFC pet tag and business cards

Item no.: NT-01 NFC tag · DT-01 NFC pet tag · VK-01 Business cards · material: PLA or TPU

  • Contains a small NFC chip: keep away from children under 3.
  • Pet tag: check it regularly for wear, attach it only to a collar and do not let your pet chew on it.
  • An NFC pet tag does not replace your dog's mandatory microchip and registration.
  • Only lock the chip if you are sure the content is correct: a locked chip can no longer be changed.

Name badges with magnet

Item no.: NP-01 · material: PLA with neodymium magnets

  • Contains strong magnets. Not suitable for children: if someone has swallowed two or more magnets, see a doctor immediately.
  • Do not wear it if you have a pacemaker or other medical implant, unless your doctor says it is safe.
  • Keep the magnets away from bank cards and other magnetically sensitive items.

Stained glass panels

Item no.: GL-01 · material: PLA or PETG, on request

  • Decorative panel: not a replacement for safety glass or for a panel that has to bear loads.
  • In a sunny window or door the panel can get warm. PLA can deform above 50 °C; choose PETG for a sunny spot.
  • Have it fitted into a door or window by a professional and check the sealant joints regularly.

Custom work and your own files

Item no.: MW-PLA, MW-PETG etc. · batch number = invoice number

  • Always tell us what you will use a part for, and we will advise on material and strength.
  • Do not use printed parts where a break could cause injury, such as load-bearing parts, climbing gear or parts of a helmet or child seat.
  • Our prints are not suitable for contact with food or drink.
  • The label lists the warnings that apply to your product.

Reporting a safety issue

Do you think one of our products is unsafe, or has something happened? Email us straight away at [email protected] or call +31 50 569 0964. Please include the item number and batch number from the label if you have them.

If a product turns out to be unsafe, we will contact everyone who bought it ourselves, and report it to the Netherlands Food and Consumer Product Safety Authority (NVWA) where required.

← Back to the website